In order to guarantee the the normal operating of equipments and develop the equipments’produce capacity,we should check the equipments regularly and maitain it .Lubricating machine is our important measure.bearing, gear, skateboards, nuts and other contact should heve the lubricating process.
The purpose of lubricating
1,Reducing rubbing and the energy consumption
2,reduce the componets’s rubbing and increase the life
3,protect the equipments’s surface and prevent erosion
The lubricating way:thin oil lubrication,dry oil lubrication and oil mist lubrication.
Thin oil lubricating uses the mineral oil to be the lubrication.Because the thin oil lubrication is liquidity and it also can be sticky to metal surface.It also has the character of viscosity
and hot-smelting, Dilute oil is more stable and has the anti-corrosion effect,However,it is not easy for dilute oil to seal.The water is easy to enter lubrication surface of equipment.
　　Dry ore lubricating is also called lubrication. Lubricating grease has the strong adhesive capacity and good protective capacity. There also has the sealing function for the friction surface.It also can prevent metal from corrosion and impurities .After adding the Join grease, the device can run for some time,it is easy to use. However, energy consumption will become larger,This does not apply to high-speed operation of equipment.
　　The consumption of mist lubrication is less. the working temperature is low and lubrication effect is good.Low maintenance costs and easy to maintain. But there is high sealing demand for mist lubrication.Also.it is strict for oil quality and compressed air .