| Jaw crusher |
 |
| ¡¡¡¡Jaw crusher is one of the important mining processing equipment.The main function of it is to break the raw materials into small pieces.this process is easy to grind.The main features:the grain is average,simple structure,relaible working,easy to maintain and low cost.Jaw crusher is widely used in ore,smelting,construction,high-way,railway, water conservation and chemical industry.The crushed materials which compressive resistance should not be more than 320Mpa.Jaw crusher is consisted of frame, eccentric axis,jaw plate,adjustor and spring. |
¡¡¡¡The crusher¡¯s work way is squeeze-type, The working principle: motor drive belt and pulley, the eccentric shaft make the jaw moving up and down, when the jaw rises, the elbow angle between the plate is becoming larger,, this process promote the fixed jaw plate close to the fixed jaw plate, so the raw materials is pressed and crushed, when the jaw moves down, the angle between toggle plate and moving jaw is becoming smaller, under the action of spring , the materials are discharged from the breaking mouth.With the motor continuously rotating,the jaw crusher can realize mass production.
¡¡¡¡
According to the various features of ore,our team have designed many types,more specifications of mining equipment.These products are high-efficiency and low cost.The whole set of mining equipments are as follows:Jaw crusher,hammer crusher,dry-wet ball mill,high-efficiency cone ball mill,MQG-tube mill,ceramic ball mill,magnetic separator,mining flotation,spiral clasifier,cylinder screen,H series rotary dryer and mine mixing drum.Knowing more information about jaw crusher type and technical parameters,please read the following pictures and table.You can also dail expert hot line: £¨0086£©13503821866 £¨È«Ì죩.Inquiring the price of jaw crusher,please dail the sales hot line: 0371-64426181 64428777
|
¡¡¡¡ Usage:This machine is mainly used in mineral processing,construction,stone pit and chemicaldepartments.The limit of products pressive strength is not morethan£¨2000kg/cm2£© |
| Chemical Parameters |
| Type |
specification
£¨mm£© |
The size Of feeding
£¨mm£©
|
The largest
feeding size
£¨mm£©
|
The discharging
grain size
£¨mm£©
|
output
£¨t/h£© |
The speed Of main bearing
£¨r/min£©
|
Matched motor |
weight(kg) |
| type |
power(KW) |
| PE-150 |
150¡Á250 |
250 |
150 |
125 |
15-45 |
1-4 |
285 |
Y1325-4 |
5.5 |
1000 |
| PE-200 |
200¡Á300 |
300 |
200 |
180 |
20-70 |
2-8 |
250 |
Y1325-4 |
11 |
1500 |
| PE-250 |
250¡Á400 |
400 |
250 |
210 |
20-80 |
5-20 |
280-320 |
Y1802-6 |
15 |
3000 |
| PE-400 |
400¡Á600 |
600 |
400 |
350 |
40-160 |
25-64 |
250 |
Y250M-8 |
30 |
6800 |
| PE-500 |
500¡Á750 |
750 |
500 |
425 |
50-170 |
30-80 |
275 |
Y280M-6 |
55 |
9900 |
| PE-600 |
600¡Á900 |
900 |
600 |
500 |
72-200 |
56-192 |
250 |
JR117-8 |
80 |
16800 |
| PEX-150 |
150¡Á750 |
750 |
150 |
120 |
10-40 |
8-35 |
300 |
Y180L-6 |
15 |
3500 |
| PEX-200 |
200¡Á1000 |
1000 |
200 |
210 |
15-50 |
15-50 |
300 |
Y225M-6 |
30 |
6300 |
| PEX-250 |
250¡Á750 |
750 |
250 |
210 |
15-50 |
13-35 |
300 |
Y225M-6 |
30 |
6010 |
| PEX-250 |
250¡Á1000 |
1000 |
250 |
210 |
15-50 |
15-45 |
280 |
Y280S-8 |
37 |
6800 |
| PEX-250 |
250¡Á1200 |
1200 |
250 |
210 |
15-50 |
20-60 |
300 |
JR115-8 |
45 |
7800 |
|
|
